Bilevelize.
The parameters lim_r, lim_g, lim_b, lim_a [0..100] are the cutoff limits for the color channels, while the flags parameter [r|g|b|a] indicates which channels should be modified.
fx_chromablurlevel;
Chroma Blur.
The parameter level [0..100] is the effect level.
Chroma Keying.
The parameter
type [normal, exact, black, white] is the kind of keying to perform, level [0..100] is the effect level, #color is the color to key and type [0..3] indicates the type of chroma-keying to use.
Render Clouds.
The parameters x_size, y_size, detail [0..100] are the effect levels, seed is the seed value for the randomizer,
turbulence [yes, no] indicates whether or not to use turbulence, tilable [yes, no] indicates if the pattern will be tilable,
#color1 and #color2 are the colors to use.
fx_correct_calevel_r level_g level_b;
Chromatic Aberration Correction.
The parameters level_r, level_g, level_b [-5..+5] are the effect levels for the three channels (percentage, decimals allowed).
fx_correct_car.x, r.y, g.x, g.y, b.x, b.y;
Color Misalignment Correction.
The parameters r.x, r.y, g.x, g.y, b.x, b.y [-10..+10] are the X and Y distances for the three channels (pixels, decimals allowed).
fx_correct_jpeglevel;
JPEG Artifact Correction.
Parameter is level [0..100].
Displace.
Parameters are zero [0..192], which is the zero level in the displacement map, mul_x, mul_y, the displacement multipliers, off_x, off_y and file-path (URL-encoded string therefore no spaces).
fx_dissolve;
Dissolve.
No parameters.
fx_duotone#light_color #dark_color;
Duotone.
Both parameters are #color.
fx_dyncontrastlevelflags;
Dynamic Contrast.
Parameters are level [0..100] and flags parameter [r|g|b|a]. The latter indicates which channels should be modified.
fx_edgedetectlevel;
Edge Detection.
Parameter is level [0..100].
fx_embosstypelevel angle;
Emboss.
Parameters are type parameter [normal, relief, alpha], level [0..100] and angle [0..360].
fx_gaussblurradius flags;
Gaussian Blur.
The parameter radius [0..1024] is the gaussian kernel radius while the flags parameter [r|g|b|a] indicates which channels should be modified.
fx_gradientpoint_list...;
Gradient mapping.
The point list consists of a number (the "count") followed by "count" coordinate pairs, e.g. fx_gradient3 0 0 128 128 255 255 ;
Grid.
The width parameters determine the line width. The offset is the start-point for the first line.
Spacing is the spacing between lines. Intersect is the size of intersections. The opacity parameter [0..100%] determines how visible the lines are.
fx_halosize blur #color;
Halo.
The parameter size [0..100] is the halo size (percentage), blur is the blurring level [0..100] and #color is the color of the halo.
fx_highpasslevel flags;
Sharpen, High-pass filter.
Parameters are level [0..100] and flags parameter [r|g|b|a]. The latter indicates which channels should be modified.
fx_limitcolorpal_type pal_size dithering;
Limit Colors.
The parameter pal_type [optimal, current] determines the palette to use, the default being “optimal” which generates an optimized octree palette.
The parameter pal_size [8..256] determines size of the palette where applicable. The parameter dithering [none, floyd, jarvis, atkinson] determines
the dithering algorithm if any. The value "floyd" means Floyd-Steinberg error diffusion, "jarvis" means Jarvis-Judice-Ninke error diffusion and "atkinson" means Atkinson partial error diffusion. The preferred method is Floyd-Steinberg.
Local Contrast Enhancement.
Parameters are level [0..100], locality [0..100], bk_sub [0..100], color_mode parameter [luma, rgb], and subtract_mode parameter [black, white].
fx_lowpasslevel flags;
Blur, Low-pass filter.
Parameters are level [0..100] and flags parameter [r|g|b|a]. The latter indicates which channels should be modified.
fx_lumasharplevel;
Sharpen, Luma.
Parameter is level [0..100].
fx_maketiletype overlap;
Make Tile.
The parameter
type [normal, content] is the algorithm to use and overlap [0..100] is the percentage of overlap. The “content” algorithm is currently not supported.
fx_matconvelements ... ;
Convolution Matrix.
Parameters are a list of 25 elements representing a 5x5 matrix.
fx_matfiltelements ... ;
Color Filter Matrix.
Parameters are a list of 20 elements representing a 5x4 matrix. The columns are input R, G, B, A and Offset, while the rows are output R, G, B and A. All values use 1.0 as 100%; e.g. fx_matfilt
1.0 0.0 0.0 0.0 0.0
0.0 1.0 0.0 0.0 0.0
0.0 0.0 1.0 0.0 0.0
0.0 0.0 0.0 1.0 0.0 ;
fx_motionblurlevel direction;
Motion-blur.
Parameters are level [0..100] and direction [0..360] (direction of motion).
fx_negative;
Negative.
No parameters.
fx_nr_bayerpixels;
Bayer Denoise.
Parameters is pixels [2..7]. This corresponds to the number of pixels to consider as a bayer matrix cell.
fx_nr_linearblurring threshold flags;
Linear Denoise.
Parameters are blurring [0..100], threshold [0..100] and flags parameter [r|g|b|a]. The latter indicates which channels should be modified.
fx_nr_medianradius;
Median Denoise.
Parameter is radius [1..16].
fx_nr_waveletluminance chrominance;
Wavelet Denoise.
Parameters are luminance [0..100] and chrominance[0..100].
fx_oilifylevel;
Oilify.
Parameter is level [0..100].
fx_pinchlevel;
Pinch.
Parameter is level [-100..+100].
fx_pixelatepixels;
Pixelate.
Parameter is pixels [2..128].
fx_premultiply_alpha;
Premultiply Alpha.
No parameters.
fx_posterizebits flags;
Posterize.
Parameters are bits [1..7] and flags parameter [r|g|b|a]. The latter indicates which channels should be modified.
Recolor.
The first two parameters are selectivity [0..100] and ref_color (color to replace). If using a replacement color, one more parameter is required, namely new_color.
If using color shifting, a three more parameters are required, namely delta_hue [-180..180], delta_sat [-100..100] and delta_val [-100..100].
fx_reflectionheight opacity gradient;
Reflection.
Parameters are height [0..100], opacity [0..100] and gradient [0..100].
fx_shadowvisibility distance blur #color;
Drop Shadow.
Parameters are visibility [0..100], distance [0..100] blur [0..100] and #color.
fx_sharpenlevel flags;
Sharpen, Normal.
Parameters are level [0..100] and flags [r|g|b|a]. The latter indicates which channels should be modified.
fx_shrinkalphapixels;
Shrink Alpha.
Parameter is pixels [-32..+32] (pixels to add or shave off).
fx_smartsharpintensity threshold tolerance flags;
Smart Sharpen.
Parameters are intensity [0..100], threshold [0..4096], tolerance [0..100] and flags parameter [r|g|b|a].
fx_spinblurangle center_x center_y;
Spin-blur.
Parameters are angle [0..15] and center_x / center_y (center of rotation).
fx_surfaceblurthreshold radius;
Surface-blur.
Parameters are threshold [0..100] and radius[0..256].
fx_synenhance;
Synthetic Enhance.
fx_twirlangle center_x center_y;
Twirl.
Parameter are angle [-360..+360] and center_x / center_y (center of rotation).
fx_unmultiply_alpha;
Unmultiply Alpha.
No parameters.
fx_unsharpintensity threshold radius flags;
Unsharp masking.
Parameters are intensity [0..100], threshold [0..100], radius [0..100] and flags [r|g|b|a].
fx_watermarkpos_x pos_y size fade file-path;
Watermark.
Parameters are pos_x [0..100], pos_y [0..100], size [0..100], fade [0..100] and file-path (URL-encoded string therefore no spaces).
fx_zoomblurlevel center_x center_y;
Zoom-blur.
Parameters are level [0..100] and center_x / center_y (center of zoom).
You can generate script code for most commands in Chasys Draw IES by using them while running the record function.